How do I start a meeting from the Cisco videoconferencing equipment without a computer?
Posted by Casey Eyring on 05 October 2015 04:18 PM
If you want to start a meeting from the Cisco videoconferencing equipment or other H.323/SIP device without using a computer, the meeting host must do one of the following steps:
Either of these actions must be completed by the host. If the meeting host is unavailable at the time of the meeting, you must start over and create a new meeting using someone else's account.
The easiest way to start a meeting using the Cisco equipment is to enable the Enable join before host option when you schedule your meeting. To do this, schedule the meeting as you normally would, ensuring that the Enable join before host option is checked.
If you have already scheduled your meeting or need to verify if this option was selected, visit https://unh.zoom.us/meeting, select your meeting, and confirm the Enable join before host option is checked.
Locate your Host Key in your profile page. This should show up at the top of the screen next to Host Key: *******. Click Show to reveal your host key. You can change it to something easier to remember if you'd like. If you do not see a host key field, contact your Zoom admin (you may a Basic account instead of a Pro account.)
When you join the meeting on the Cisco equipment or other H.323/SIP device, Zoom will ask for a host key. Enter this code into the field using the remote control and press #. This will begin the meeting.
To connect the Cisco equipment or H.323/SIP device to the meeting
If you have a computer and the host is available:
If you have a computer available and the host is available and you would like to join the meeting using an H.323/SIP device, you can also follow these instructions.